Ghost Immobiliser Fitter
Ghost immobilisers are an effective method to protect your car from thieves. They prevent vehicles from getting started until the correct code is entered. They can be used to remotely track a vehicle. They are getting more and more popular and many insurance companies offer discounts to drivers with these systems.
It is tamper-proof
The Ghost Immobiliser is a sophisticated security device that prevents your vehicle from starting unless a unique PIN code is entered, or a beacon is visible. The system can be customized to fit your vehicle and is highly efficient as an anti-theft device. It is important to test your system after installation to make sure it's working properly. Entering the PIN while starting the engine is an easy method to verify that the system is set up correctly. Regular testing will identify any issues or issues with the system as early as is possible.
The system communicates directly with the ECU and will not allow your car to start unless you select the proper sequence. You can do this by using the electronic buttons that are located on the steering wheel or via an app on your smartphone. Its low profile and tamperproof design make it difficult for thieves. It can be used in conjunction with a beacon to assist in tracking the location of your vehicle. It is a great solution to safeguard valuable vehicles that have been modified, or for people who want to secure their costly or unique cars.
This tamper-proof device utilizes the buttons on your steering wheel to create an exclusive sequence known only by you. The sequence is computationally unattainable for thieves to guess, and it can be easily changed with a secure reset key. It can be installed by a technician most vehicles.
After installing autowatch ghost installers will need connect it to an electrical source as well as a grounding point. Get the wiring diagram for your vehicle to identify the wires that are required. To avoid short circuits or electrical damage, cover all connections using heat-shrink tubing or insulation. Also, you should check the connections and mounting for any signs of tampering caused by thieves.
The Ghost 2 immobiliser cost can be set to Service/Valet for older vehicles that require the battery isolation to carry out maintenance or servicing. This will turn off the device using an individual pin code, which will prevent it from being turned back on by thieves.
Wireless
In contrast to other anti-theft devices ghost immobilisers function in a silent manner and aren't identified by thieves. They can be fitted in a variety of vehicles and protect them from key cloning, hacking and signal relay attack. They also connect to the CAN network and are used to track a vehicle remotely. They can provide owners with instant notifications when their vehicle is stolen. It's one of the most effective ways to prevent car theft, and some insurance companies offer discounts to those who install them.
The Ghost II immobiliser offers a inexpensive and easy way to protect your vehicle from theft. This discrete device operates wirelessly and is compatible with most vehicles. It is weatherproof and tamperproof, making it an excellent choice for any vehicle. It is backed by a three-year warranty. Contrary to other security products, the Ghost II does not require any additional wiring or other external components. Its unique pin code sequence guards your car from key cloning and theft by preventing the engine from starting until a specific disarm sequence is entered. The sequence can vary from one to 20 buttons, which means that thieves will need to invest much more time trying to break the code before they are able to drive away.
Another benefit of the Ghost II is its ability to stop signals from a thief's key fob. It can tell whether a key fob has been duplicated or stolen and disable the engine by setting off an alarm. It can also stop the use of signal relay devices which are frequently employed by organized car thieves to gain access to vehicles.
It is important to regularly test the Ghost Immobiliser system to ensure that it's working properly. This will allow you to identify any issues early and fix them before they become a serious problem. It is a good idea to test the system by entering the PIN code, then turning on the engine as part of your regular check-ups of your vehicle.
It is important to mount the immobiliser in a concealed area in order to make it difficult for thieves to gain access. If possible, hide the device behind your dash by using cable tie. Be sure that all connections are properly insulated and won't be tampered with by thieves. Verify that the mount is secured.
It is compatible with a variety of vehicles
The ghost immobiliser is an extremely effective security tool to prevent car theft. It prevents your vehicle's engine from starting until the proper pin code is entered. The code can be generated by pressing the buttons on the steering wheel, door panel, or on the centre console. The immobiliser is tamper proof and can be reprogrammed by the owner at any time. It also protects from hacking, key-cloning and other malicious activities.
While some drivers might try to install the Ghost Immobiliser on their own however, it is recommended you hire an expert. This is because the installation process is complex and any errors can render the device useless or even damage your vehicle. Additionally, DIY installation can void warranties for both the Ghost Immobiliser as well as your vehicle.
The best way to start is by obtaining the wiring diagram of your vehicle model. This will give you a guideline to locate the CAN H and CAN L wires, which are the connections for the immobiliser. Once you've located these wires mark them so that they're not accidentally disconnected during the installation process. Also, ensure that you choose a safe and reliable grounding point for the system.
Once the wires are connected, it's recommended to test the immobiliser to make sure everything is working properly. Enter the PIN code, then start your engine to determine whether everything is working. It is also a good idea to test the immobiliser regularly to ensure it functions in the way it was intended to.
Another benefit of the ghost immobiliser is that it does not require any key fobs or LED indicators, and can be disarmed by pressing a distinct sequence of buttons on your steering wheel, door panel, or centre console. The immobiliser leaves no trace of its location, making it hard for thieves to detect. Additionally, it can be used to bolster the security of your vehicle in the event of a burglary and is recommended by many insurance companies.
It is easy to install
The Ghost immobiliser is an sophisticated device that keeps your vehicle safe from the most skilled thieves. It prevents your vehicle from starting until a distinct PIN or sequence is entered with the key fob. This stops hackers from cloning or hacking, and even key theft. Thieves cannot steal your car. It uses a variety of sensors to detect attempts to drive away and can alert the owner or the police in the event of the tampering.
Installing a Ghost Immobiliser can be a bit difficult, especially for those who have never installed alarms or security systems before. It is crucial to have the proper tools and materials to ensure an efficient installation. A multimeter can be used to verify electrical values, and cable ties and insulation tape can shield connections. The Ghost immobiliser user's manual contains specific instructions that are tailored to the specific model and wiring of your vehicle.
During the process of installation, it's important to check the location of the CAN H and L wires to ensure that they are in the correct locations. They are vital for powering the immobiliser therefore, any error could lead to improper functioning or system failures. Label the wires with tape or labels so you can keep track of them. Finally, you should identify an unambiguous source of 12V power and a grounding point.
Once you've found the right place, you can begin assembling the ghost immobiliser. To avoid short circuits or accidental airbag deployment, you'll have to disconnect the battery first. Then you can begin connecting the wires. Make sure to follow the instructions in the user guide to ensure a safe and secure installation.
Once you've completed the wiring After you have completed the wiring, connect the Ghost immobiliser using CAN to the engine control unit. It will be a challenge for thieves, as the device is directly connected to the engine control unit, and it is not possible to remove or disable it. It's also secure against tampering, and the only way to disable it is by entering a personal pin number. This pin code is only available to the owner of the vehicle and the installer.
You can also make use of Ghost immobiliser to temporarily allow someone else to drive the vehicle, for instance when you are away on business or require assistance. This feature is called the Service/Valet Mode, and it can be turned on by using a key fob or mobile app.